Grafična težava

[filips]

Imam Raspberry Pi 2 B+. Imam sistem Raspbian. Zaganjanje imam nastavljeno v grafičnem načinu. Ko sem ga enkrat ponovno zagnal, se mi zgornja menijska vrstica ne prikaže in nekaj utripa, kot je prikazano v videoposnetku na povezavi. Zanima me, kako to popraviti, brez da ponastavim sistem.
https://onedrive.live.com/redir?resid= 94FD65D62BCC2864!503& authkey=!AG4cZRQE0sH9Afo&ithint=video%2cmp4

Vse logs datoteke xserverja so na voljo na: https://onedrive.live.com/redir?resid= 94FD65D62BCC2864!504&authkey= !AJPVj29um_g1O8Q&ithint=folder%2clog

[filips]

Če vpišem sudo startx mi pride:

X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-2-mx5 armv7l Debian
Current Operating System: Linux raspberrypi 4.4.7+ #877 Sun Apr 17 12:45:04 BST 2016 armv6l
Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1232 bcm2708_fb.fbheight=992 bcm2708.boardrev=0x10 bcm2708.serial=0x7082120c smsc95xx.macaddr=B8:27:EB:82:12:0C bcm2708_fb.fbswap=1 bcm2708.uart_clock=3000000 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=deadline rootwait
Build Date: 11 February 2015 09:31:17PM
xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.33.1
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (–) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.1.log”, Time: Thu Apr 21 16:54:38 2016
(==) Using system config directory “/usr/share/X11/xorg.conf.d”
FATAL: Module g2d_23 not found.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type “ONE_LEVEL” has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
> Warning: Type “TWO_LEVEL” has 2 levels, but <TLDE> has 4 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server

xinit: connection to X server lost

waiting for X server to shut down Server terminated successfully (0). Closing log file.

xinit: unexpected signal 2

Sem iskal tudi na googlu in piše da je FATAL: Module g2d_23 not found neškodljiv.

• Ta odgovor je spremenil/a filips 7 years, 11 months nazaj.
• Ta odgovor je spremenil/a filips 7 years, 11 months nazaj.
• Ta odgovor je spremenil/a filips 7 years, 11 months nazaj.

[filips]

Imam hdmi to vga pretvornik. Monitor imam LCD. Vežem prek HDMI to VGA pretvornika saj monitor ne podpira HDMI. Monitor ima razmerje 4:3 televizijo pa 16:9 Ne vem zakaj mi to ne dela zdaj, prej pa mi je delalo. Ne dela mi na televiziji, monitorju in ne dela tudi če se na računalnik povežem prek oddaljenega namizja.

[filips]

Težavo sem odpravil.

[filips]

Ali lahko posodobim sistem, brez da bi zbrisal stvari, ki so na kartici?

[kontrabasko]

sudo apt-get update
sudo apt-get dist-upgrade

Izgubil ne boš ničesar, prvi ukaz posodobi knjižnico (torej poišče najnovejše verzije programskih paketov), drugi ukaz je dejanska posodobitev.

Če imaš majhno SD kartico in pogosto posodabljaš sistem potem je dobro tudi včasih uporabiti ukaz za čiščenje preteklih prenosov knjižnice.

sudo apt-get clean

[Avtor]

Prispevki