Ustvarjeni odgovori

[filips]

Ali lahko posodobim sistem, brez da bi zbrisal stvari, ki so na kartici?

[filips]

Težavo sem odpravil.

[filips]

Imam hdmi to vga pretvornik. Monitor imam LCD. Vežem prek HDMI to VGA pretvornika saj monitor ne podpira HDMI. Monitor ima razmerje 4:3 televizijo pa 16:9 Ne vem zakaj mi to ne dela zdaj, prej pa mi je delalo. Ne dela mi na televiziji, monitorju in ne dela tudi če se na računalnik povežem prek oddaljenega namizja.

[filips]

Če vpišem sudo startx mi pride:

X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-2-mx5 armv7l Debian
Current Operating System: Linux raspberrypi 4.4.7+ #877 Sun Apr 17 12:45:04 BST 2016 armv6l
Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1232 bcm2708_fb.fbheight=992 bcm2708.boardrev=0x10 bcm2708.serial=0x7082120c smsc95xx.macaddr=B8:27:EB:82:12:0C bcm2708_fb.fbswap=1 bcm2708.uart_clock=3000000 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=deadline rootwait
Build Date: 11 February 2015 09:31:17PM
xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.33.1
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (–) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.1.log”, Time: Thu Apr 21 16:54:38 2016
(==) Using system config directory “/usr/share/X11/xorg.conf.d”
FATAL: Module g2d_23 not found.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type “ONE_LEVEL” has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
> Warning: Type “TWO_LEVEL” has 2 levels, but <TLDE> has 4 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server

xinit: connection to X server lost

waiting for X server to shut down Server terminated successfully (0). Closing log file.

xinit: unexpected signal 2

Sem iskal tudi na googlu in piše da je FATAL: Module g2d_23 not found neškodljiv.

• Ta odgovor je spremenil/a filips 8 years, 3 months nazaj.
• Ta odgovor je spremenil/a filips 8 years, 3 months nazaj.
• Ta odgovor je spremenil/a filips 8 years, 3 months nazaj.

[Avtor]

Prispevki